SteadiHub
2015Forum Camera Stage/Donkey Box

Jeu de connexion Bayonet entre le poste XCS et le support de caméra Pro junction box

Ce que le fil a révélé

  • Rotation de la junction box 180 degrés peut éliminer ou réduire significativement le jeu dans la connexion baïonnette entre XCS poteaux et Pro junction boxes.
  • Le jeu dans la connexion baïonnette peut résulter de différences de tolérance entre junction boxes et des postes de différentes périodes de fabrication ou fabricants.
  • Le collier de verrouillage d'un ancien junction box peut être échangé sur un nouveau pour résoudre des problèmes de jeu.
  • Pro did not change bayonet tolerances but modified the threaded ring approximately 8-9 years ago to add three additional threads for docking capability.
  • XCS modified their Pro-style mounts after Pro added extra threads, causing compatibility issues where the locking ring may bottom out on the post and prevent full tightening.
  • Adding a retaining ring that raises the junction box by an equivalent thread height can resolve play caused by inadequate thread engagement on the post.
  • Safety pins on the junction box side, whether pressed-in or screw-type, can affect fit quality; tightening screw-type pins may improve seating.
  • Wrapping threads with PTFE tape and inserting small pieces into the mating pin holes can help tighten the connection.
  • On 2-inch posts specifically, the newer locking ring may contact the post surface before full tightening is achieved.
  • Regular inspection and tightening with the post tool and plastic hammer helps maintain connection integrity over time.

Dépend de

  • Some experiences are anecdotal and lack definitive root cause analysis.
  • The 180-degree rotation fix remains unexplained by those who implemented it.
  • Solutions mentioned were not tested systematically across all post and junction box combinations.
  • One user reported difficulty reproducing the manufacturer's explanation regarding tolerance changes.
  • PTFE tape and pin hole modifications are described as temporary or supplementary fixes rather than permanent solutions.
Lire le fil originalPoser une question sur ce filLa réponse cite les archives