SteadiHub
2010Forum Steadi-Newbies

Équilibrer un appareil photo Canon 5D sur un Steadicam sled nécessite un poids supplémentaire

Il y a 16 ans. Le matériel et les prix ont peut-être changé depuis.

Ce que le fil a révélé

  • A Canon 5D alone is too light to properly balance on a Steadicam sled, requiring added counterweight to pull the arm down into level position
  • Cast iron weights can be temporarily attached to the sled shaft as a quick solution for balancing
  • Custom steel weight bars with threaded holes along their length, weighing around 12 pounds, can be machined and fitted with Manfrotto quick release adapters for permanent balancing solutions
  • Diving weights mounted on either side of a camera bracket can achieve proper balance and weighting
  • Commercial weight cages with modular weighted plates in various denominations offer flexibility for different camera and lens configurations
  • Canon lenses with fly-by-wire focusing mechanisms present significant challenges for focus pulling on Steadicam rigs compared to lenses with hard stops
  • Zeiss ZE lenses with hard stops are preferred over Canon zooms because they respond to lens mapping features in Preston follow focus systems
  • Canon zooms require visual focus confirmation through HD transmission rather than traditional marking systems because their focus rings have no defined stops

Dépend de

  • Solutions discussed were specific to earlier Steadicam setups in 2010
  • Focus pulling difficulties mentioned relate specifically to Canon's electronic focusing system design
  • Some solutions were improvised for individual shoots rather than thoroughly tested designs

Matériel dans ce fil

HU3

Pièces

Follow Focus

Même matériel ou mêmes pièces

  1. 2026Échanger un ARRI ALEXA 35 entre trépied/studio et montage Steadicam® : choix de la plaque de base et flux de travail le plus rapide.FacebookSteadicam operators group
  2. 2026Se concentrer et zoomer pendant le fonctionnement, en particulier sur les spectacles en directOperator practice
  3. 2025LC-1 (Lens Control-1) Système follow focus : architecture câblée, moteurs et expérience opérationnelle précoce (1990).FacebookThe Steadicam Group
  4. 2024Modifications d'une plate-forme Scout Steadicam pour une distribution d'électricité et une connectivité élargieGeneral Discussion
Lire le fil originalPoser une question sur ce filLa réponse cite les archives