2008Forum Steadi-Newbies
Stratégies de distribution de poids et d'acheminement par câble pour la plate-forme FlyerLE steadicam
Il y a 18 ans. Le matériel et les prix ont peut-être changé depuis.
Ce que le fil a révélé
- Le FlyerLE a une masse maximale de 19 livres déterminée par la capacité du bras, et le dépassement de cette limite empêche le bras de se mettre à niveau même lorsque le bouton de réglage atteint sa limite.
- Un récepteur audio peut être repositionné plus bas sur la plate-forme (comme velcroed vers le haut de la batterie) pour ajuster le centre de gravité et permettre une extension de poste plus courte sans ajouter de poids de contrepoids à la caméra.
- Audio receiver cables can be routed externally along the post from camera to monitor without significantly affecting rig handling, using thin supple cabling for at least the first 10 feet and small velcro loops to keep routing organized.
- Video transmitter antennas should be positioned vertically rather than lying flat to improve signal reception when the receiver is not directly above the rig.
- A backup audio recording device in the sound operator's kit provides insurance against wireless audio dropouts or interference, with backup camera microphone recording also recommended as a safety measure.
- When using wireless audio with a sound operator recording externally, a timecode generator should be used to synchronize the camera with the external recorder rather than relying on the camera's internal timecode.
Dépend de
- The suggestion to move weight lower might help when close to maximum capacity but this effect is uncertain.
- The internal post structure may have limited space for additional wiring, making external cable routing the more practical option.
- Camera internal timecode generators are often unreliable and should not be trusted without verification.
- Budget constraints may limit access to higher-quality equipment like professional video transmitters.