SteadiHub
2011Forum Steadi-Newbies

Comparaison entre les stabilisants originaux Flyer et Flyer LE pour différents poids de caméra

Il y a 15 ans. Le matériel et les prix ont peut-être changé depuis.

Ce que le fil a révélé

  • L'original Flyer reste un choix solide pour les caméras plus légères comme les modèles EX3 ou HVX200 et coûte moins cher que le LE
  • Le Flyer LE dispose d'un poteau extensible plus épais qui gère les charges de caméra plus lourdes plus facilement que le modèle original
  • The Flyer LE has a larger knurled gimbal grip and a redesigned topstage that is quicker to use compared to the original Flyer
  • The original Flyer's 3/4 inch post becomes difficult to work with in low mode when carrying heavier cameras
  • The Flyer LE can technically support a RED camera when stripped down, but the weight becomes problematic once essential accessories like follow focus, matte box, and monitoring equipment are added
  • Cable routing through the topstage becomes an issue with RED cameras on the LE, as power and video cables may not fit through the hole
  • The extendable post on the Flyer LE allows balance adjustments between takes without needing to remove the rig from the stand and use a wrench

Dépend de

  • Comparisons focus on specific camera models from 2011 and may not apply to modern equipment
  • The discussion about RED camera compatibility is limited to one operator's experience with a stripped-down configuration
  • No direct side-by-side testing reported between both models with identical camera setups
  • The original Flyer's performance with heavier cameras is described as possible but not ideal

Pièces

Top Stage, Low Mode, Follow Focus

Même matériel ou mêmes pièces

  1. 2026Gilet gouttes: ce qui abaisse la prise de bras achète réellement, et ce que cela coûte en hautOperator practice
  2. 2026Connecteurs Lemo sur le ARRI Artemis sled : pignon, vérification de la polarité et alimentation low-mode moniteurs et batterie Volt.FacebookSteadicam operators group
  3. 2026Réduction de la chute de tension dans le câblage standard Steadicam® Zephyr pour caméras de haute puissance.ControverséFacebookSteadicam operators group
  4. 2026Tiffen Steadicam® Elite sled (2026) : qualité de construction, distribution de puissance et capacité de charge par rapport à Steadicam® Axis.FacebookSteadicam operators group
Lire le fil originalPoser une question sur ce filLa réponse cite les archives