Ce que le fil a révélé

• An Arri SR3 camera can be powered from a Clipper 324 sled's 24V Lemo connector without issues, even when voltage approaches the upper acceptable limit.
• Voltage from a Clipper 324 with two Steadicam cubes starts around 33.28V and drops to approximately 32.20V within the first minute of use, remaining within acceptable operating parameters.
• Using sled power instead of camera battery can reduce weight on the stabilizing arm, though the camera battery can alternatively serve as ballast for balance.
• Additional powered devices on the sled such as follow focus systems and video transmitters will draw additional current and further reduce voltage.

Dépend de

• The advice is based on experience with Clipper 324 and PowerCube batteries, not exhaustive testing across all conditions.
• This approach assumes familiarity with acceptable voltage ranges and camera protection mechanisms.

Pièces

Follow Focus

Même matériel ou mêmes pièces

1. 2026Se concentrer et zoomer pendant le fonctionnement, en particulier sur les spectacles en directOperator practice
2. 2026Échanger un ARRI ALEXA 35 entre trépied/studio et montage Steadicam® : choix de la plaque de base et flux de travail le plus rapide.FacebookSteadicam operators group
3. 2025LC-1 (Lens Control-1) Système follow focus : architecture câblée, moteurs et expérience opérationnelle précoce (1990).FacebookThe Steadicam Group
4. 2024Modifications d'une plate-forme Scout Steadicam pour une distribution d'électricité et une connectivité élargieGeneral Discussion