Ce que le fil a révélé

• Un support sur mesure peut être conçu pour fixer un support d'objectif de 19mm directement sur une plaque XCS dovetail, éliminant ainsi la nécessité de plaques de pont et de base séparées.
• The bracket features adjustable 19mm aluminum bars that can be repositioned vertically and horizontally to accommodate different lens support placements relative to the camera.
• The 15mm rods that mount into the plate are approximately 75mm in length and can extend outward by roughly 1.5 inches for variable reach.
• When socket screws are tightened securely, the bracket remains rigid enough for motorized lens support applications, especially when braced by an actual lens support bracket.
• The bracket can be configured with multiple bar lengths by using interchangeable sets that take seconds to swap, allowing adaptation to different lens sizes and support requirements.
• This type of bracket proves useful for supporting anamorphic lenses and can be incorporated into larger camera rigs including matte boxes and focus systems.
• A kit configuration with different bar lengths and a spacing plate can keep the connection flush to the front of the dovetail.

Dépend de

• Design is specific to XCS plates and their dovetail mounting system.
• Aluminum bars offer less strength than steel alternatives, though the bracket is intended to be partially supported by an actual lens support bracket during use.
• Production manufacturing proved cost-prohibitive when quoted, limiting commercial availability.
• Effectiveness depends on the lens support bracket being used simultaneously to provide lateral bracing and eliminate bar deflection.

Pièces

Base Plate

Même matériel ou mêmes pièces

1. 2026Échanger un ARRI ALEXA 35 entre trépied/studio et montage Steadicam® : choix de la plaque de base et flux de travail le plus rapide.FacebookSteadicam operators group
2. 2026Fonctionnement d'un Steadicam® Zephyr sans Volt: drop time, contrôle de l'horizon, et l'effet de la répartition du poids du groupe supérieur sur la balance.ControverséFacebookSteadicam operators group
3. 2026Échanger la caméra entre trépied et plate-forme: la mise à niveau la moins chère la plupart des opérateurs ne font jamaisOperator practice
4. 2026Plaques d'adaptateur caméra et systèmes de fixation stabilisant à conserver dans un kit d'opérateur steadicamGeneral Discussion