Ce que le fil a révélé

• The Manfrotto MN357 receiver can be mounted to a Pilot stage plate, but the original single screw connection provides insufficient thread engagement for safety.
• Adding a second screw by tapping additional threaded holes in the Manfrotto receiver and filing down the screw heads to clear the stage provides a more secure dual-screw attachment.
• The Manfrotto 577 receiver includes pre-threaded holes in 1/4 BSW and M6 sizes that may be usable for Pilot mounting, though compatibility with Pilot drill patterns should be verified before use.
• Standard Manfrotto quick release plates can be difficult to keep securely tightened during use.

Dépend de

• The modifications described were performed on a Manfrotto MN357 and may require different adjustments for other models.
• Whether the pre-threaded holes in the 577 receiver align with Pilot drill patterns was not confirmed in the discussion.
• No recommendations were provided for alternative manufacturers or baseplate models.
• The discussion dates from 2010 and may reference equipment specifications that have since changed.

Pièces

Base Plate

Même matériel ou mêmes pièces

1. 2026Fonctionnement d'un Steadicam® Zephyr sans Volt: drop time, contrôle de l'horizon, et l'effet de la répartition du poids du groupe supérieur sur la balance.ControverséFacebookSteadicam operators group
2. 2026Échanger un ARRI ALEXA 35 entre trépied/studio et montage Steadicam® : choix de la plaque de base et flux de travail le plus rapide.FacebookSteadicam operators group
3. 2026Échanger la caméra entre trépied et plate-forme: la mise à niveau la moins chère la plupart des opérateurs ne font jamaisOperator practice
4. 2026Plaques d'adaptateur caméra et systèmes de fixation stabilisant à conserver dans un kit d'opérateur steadicamGeneral Discussion