Ce que le fil a révélé

• Un DSR-570 peut être monté sur un Flyer sled avec commande sans fil follow focus et iris, bien que le poids et la distribution de puissance nécessitent une attention particulière.
• The Flyer sled comes with a 2-pin Lemo to 4-pin Canon XLR power cable for the camera.
• The camera's Hirose connector is limited to 1 amp output and should not power larger motor drivers; use the Anton Bauer tap on the camera handle instead, which provides 50 watts.
• Removing the camera viewfinder and routing on-screen displays to monitoring outputs helps reduce weight on the sled.
• Using PAG C-50 or NiMH batteries rather than lithium batteries may help achieve better balance.
• Heavy lenses like the Canon J11 can push the total weight over acceptable limits for the sled.
• A custom Y-cable with XLR4 connectors can split power to simultaneously feed both the follow focus unit and other accessories.
• The Flyer dovetail plate does not fit certain aftermarket Sony plates like the Baer Bel model.
• Direct mounting the Flyer dovetail to the bottom of the DSR-570 using a high-quality screw is possible.

Dépend de

• Weight balance depends heavily on the specific lens model used.
• The power solution described assumes standard wireless follow focus and iris control systems; different kits may have different power requirements.
• No definitive confirmation provided that all wireless follow focus and iris systems will work reliably on the Flyer sled.
• Discussion does not address all potential power management scenarios or confirm maximum usable accessory payload.

Pièces

Dovetail Plate, Follow Focus

Même matériel ou mêmes pièces

1. 2026Éliminer les vibrations avec le ARRI ALEXA 35 sur le Steadicam® : options de plaque rigide pour contourner le système dovetailFacebookThe Steadicam Group
2. 2026Échanger la caméra entre trépied et plate-forme: la mise à niveau la moins chère la plupart des opérateurs ne font jamaisOperator practice
3. 2026Se concentrer et zoomer pendant le fonctionnement, en particulier sur les spectacles en directOperator practice
4. 2026Échanger un ARRI ALEXA 35 entre trépied/studio et montage Steadicam® : choix de la plaque de base et flux de travail le plus rapide.FacebookSteadicam operators group