SteadiHub
2005Forum Monitors

Montage et alimentation d'un moniteur LCD Rainbow 2 16:9 sur une caméra EFP

Il y a 21 ans. Le matériel et les prix ont peut-être changé depuis.

Ce que le fil a révélé

  • Un support de montage Transvideo existe pour cette configuration de moniteur, mais est décrit comme pas particulièrement robuste malgré son fonctionnement, coûtant environ 100 euros.
  • Une autre option de moniteur du fabricant de la plate-forme Archer comprend un générateur d'armature et atteint 750 nits de luminosité, avec des points de montage compatibles avec les vis standard 1/4-20.
  • The HR10-7P-6P 6-pin male Hirose connector can be used to combine video and power delivery over a single cable when both the monitor and camera equipment feature matching Hirose connectors.
  • A Ted Churchill design monitor bracket was reported to work well for this application.
  • A Marrell bubble frameline generator solution includes a VDA allowing a single feed with both bubble and generator to the monitor plus two separate clear feeds to transmitter and onboard recorder.

Dépend de

  • The Transvideo option required an additional $1,200 USD for a separate frameline generator, making the total cost prohibitive for the original requester.
  • Confidence in the Transvideo bracket's structural integrity was questioned despite its functionality.
  • The compatibility and fitment of alternative monitor solutions to specific EFP rigs depends on exact camera configuration and available mounting points.
  • Pin-out details for adapting cables to specific EFP models would need to be confirmed based on individual equipment.

Pièces

Monitor Bracket

Même matériel ou mêmes pièces

  1. 2026Trouver un moniteur lumineux (1500-2000 Nits) low-mode avec enregistrement et SDI I/O pour remplacer un Transvideo Starlite défectueux.ControverséFacebookSteadicam operators group
  2. 2026Montage d'un capteur Mo-Sys LED-wall sur ARRI Trinity 2 avec le capteur orienté vers le haut pour la production virtuelle.FacebookArri Artemis Trinity
  3. 2026Modernisation Steadicam® PRO sled: Rénovation du support de batterie Gen-2 et universelle monitor bracket sur le collier de tube.FacebookSteadicam operators group
  4. 2026Alimenter tout depuis le sled : tension, courant, et pourquoi les deux se confondentOperator practice
Lire le fil originalPoser une question sur ce filLa réponse cite les archives