2011Steadi-Newbies forum
Power cabling solutions for the Flyer and Flyer LE camera stabilizer rigs
15 years old. Gear and prices may have changed since.
What the thread found
- The original Flyer model has a 2-pin lemo power connector on the stage, while the Flyer LE has a 3-pin lemo connector
- Powering the camera directly from the sled is often unnecessary since camera batteries can provide adequate power while saving critical weight
- A 2-pin lemo to 4-pin XLR cable typically comes included with the Flyer kit and can power accessories like wireless receivers that accept XLR power inputs
- Custom cables converting lemo connectors to P-tap multitaps can be fabricated to distribute power to multiple accessories on the stage
- Different 2-pin lemo connector types exist and may not be cross-compatible, requiring verification before purchasing cables
- A 3-pin lemo to 2-pin lemo adapter cable can be used to connect accessories to the Flyer LE power output
Depends on
- The original poster's rig details were corrected during discussion, creating initial confusion about which model they owned
- Specific cable suppliers and fabrication sources mentioned by name cannot be fully verified from this thread
- Weight considerations and specific accessory power requirements vary based on individual shooting setups
- The thread does not provide comprehensive specifications for all possible power distribution scenarios