What operators found

• Static balance should be achieved first by positioning the camera's center of gravity slightly behind the post centerline and spreading battery and monitor paddles far apart on the bottom spar.2011 Steadi-Newbies
• TV glasses can help operators keep visual contact with the shot when a traditional monitor is not viewable, such as during backward-facing camera work on moving vehicles.2011 MonitorsDisputed
• The plastic material used in 3A vest straps is polypropylene or polyethylene, though identification can be uncertain due to plastic variations2011 VestsDisputed
• Memory foam with high density and conforming properties can be layered in cases to protect equipment without requiring individual foam cutouts for each item.2011 Cases/Carts/Stands and Transport
• A cameraman operating a Segway-mounted camera rig struck an obstacle on the ground while paying attention to the monitor, causing him to fall but escape serious injury.2011 Vehicles and MountsDisputed
• Larger high-brightness monitors above 10 inches are beneficial for jib operations, remote head operations, and aerial camera work2011 Monitors

Still argued about

1. 2011Using TV glasses as monitoring solution for camera work in specialist situationsMonitors
2. 2011Repair options for cracked plastic shoulder strap on 3A vestVests
3. 2011Safety risks when operating camera rigs on Segways during live sports coverageVehicles and Mounts

Often in the same threads

Follow Focus47, Zephyr42, Top Stage27, Low Mode18, Base Plate16, MDR15, Modulus15, BFD13, Dovetail Plate12, Arm Post9, Master Series9, G-708

All threads

1. 2011Balancing a Steadicam Pilot rig and understanding drop time for beginnersSteadi-Newbies
2. 2011Using TV glasses as monitoring solution for camera work in specialist situationsDisputedMonitors
3. 2011Repair options for cracked plastic shoulder strap on 3A vestDisputedVests
4. 2011Using memory foam slabs in equipment cases for variable padding without custom cutoutsCases/Carts/Stands and Transport
5. 2011Safety risks when operating camera rigs on Segways during live sports coverageDisputedVehicles and Mounts
6. 2011Monitor size requirements for different camera operation scenariosMonitors
7. 2011Standard practices for applying hook and loop velcro to camera equipmentBrackets/Widgets
8. 2011Steadicam EFP training video availability and format qualitySteadi-Newbies
9. 2011Preston wireless follow focus motor runaway after extended useFollow Focus
10. 2011Sourcing Gold Spring arms and information about spring color options for Steadicam rigsArms
11. 2011Powering multiple wireless and follow-focus accessories from a Steadicam Flyer batteryOperating
12. 2011Docking bracket options for pro sled that allow full rotation to check balanceCases/Carts/Stands and Transport
13. 2011Adjustment and performance characteristics of 3A and Cinema Products armsDisputedArms
14. 2011Mounting solutions for back-heavy Alexa cameras on steadicam rigsBrackets/Widgets
15. 2011Insurance coverage for freelance camera operators' equipment on student film productionsLegal / Business Practices
16. 2011Arri UDM-1 ultrasonic distance measurement device for follow focus applicationsFollow Focus
17. 2011Sony F65 camera operational characteristics, power requirements, and field deployment concernsDisputedCameras (Film/Video/HD)
18. 2011Fiber jumper cable routing and attachment techniques for steadicam live television workVideo Assist and Video Accessories
19. 2011Compatibility of RED One MX camera with Zephyr Steadicam sledSteadi-Newbies
20. 2011Choosing between budget and diagnostic chargers for Anton Bauer batteriesSteadi-Newbies