What the thread found

• The top stage of the Flyer LE features a 3-pin FGG.0B.303 LEMO female connector for power and a BNC connector for video
• Standard new Flyer LE rigs include a power cable converting from 3-pin LEMO to 4-pin XLR, though conversion from 4-pin XLR alone is sometimes simpler
• The Flyer LE lacks power and video connections at the bottom of the post, which causes weight distribution problems and limits accessory placement
• Potential custom solution involves tapping into the monitor cable multi-core with an 8-pin PRO LEMO breakout box to provide video and power outputs on the lower spar while maintaining stock compatibility
• Operating RED cameras on a Flyer LE typically requires a remote follow focus unit and additional power cables to support video assist and wireless systems

Depends on

• No images of the connectors were provided to verify appearance
• The custom breakout box solution was still in development at the time of discussion and may not have been completed
• Upgrading to larger rigs was noted as an alternative but falls outside the budget considerations mentioned

Parts

Top Stage, Follow Focus

Same gear or parts

1. 2026Upgrading an older Steadicam® MK-V with 1.5-inch post to Volt configuration or switching to the new Steadicam® Elite (1.25-inch post, 14 kg).FacebookThe Steadicam Group
2. 2026Recommended upgrade priorities for a GPI Pro steadicam rigSteadi-Newbies
3. 2026Swapping the camera between tripod and rig: the cheapest upgrade most operators never makeOperator practice
4. 2026Transvideo has ceased trading: what owners of their monitors need to knowOperator practice