2014Steadi-Newbies forum
Using a DJI Ronin gimbal on a Steadicam arm via an adapter instead of a traditional sled
12 years old. Gear and prices may have changed since.
What the thread found
- A Cinemilled adapter allows mounting a DJI Ronin directly to a Steadicam armpost without requiring a sled, relying on the gimbal's built-in stabilization.
- The Ronin mounted this way can perform stabilized pan and tilt movements, either through a separate operator with a remote control or via a joystick on the gimbal itself.
- Weight restrictions apply to this setup configuration, with the X-10 vest recommended as a suitable option.
- Spring adjustments can be made to an existing Steadicam arm to accommodate heavier payloads by replacing springs with different weights.
- The Cinemilled adapter is designed specifically for the Ronin and connects to the gimbal's top bar connector.
- Alternative gimbal manufacturers offer similar mounting solutions with different names, such as specialized plates for the MoVi system.
Depends on
- The Cinemilled adapter has manufacturer-specified weight restrictions that must be observed.
- Single operators may have difficulty controlling both stabilization and camera tilt simultaneously without a second person.
- The thread discusses whether tilt control is possible with the armpost-mounted configuration, with some uncertainty initially present.
- This setup approach was relatively new in 2014 and long-term performance data was not yet available.
- Compatibility is limited to specific gimbal models, with MoVi requiring its own proprietary mounting solutions.