Connecting HD cameras to standard definition stabilizer sleds

Gear

ZephyrCan I fly my Alexa or RED on a Zephyr?389

Master SeriesIs a used Master Series rig worth buying as a first big rig?191

BFDHow do I power my BFD receiver from my camera or sled?186

VoltCan I retrofit a Volt onto my existing sled or gimbal?168

ArtemisHow do I power my camera and accessories from an Artemis sled?166

MDRWhere can I mount my Preston MDR on my rig?143

ModulusIs there a Modulus option for HD wireless video?141

G-70Will my G-70 fit my vest, gimbal or sled?126

FI+ZCan I control iris and zoom wirelessly, not just focus?60

HU3Where can I get my HU3 repaired, refurbished or repainted?60

CineLiveHow do I pack and case my CineLive rig for transport?54

G-70XHow does the G-70X compare to Pro Titan, Xarm and other arms?46

Trinity 2Is Trinity 2 SUP 3.0 firmware safe to install or buggy?46

Ultra VestWhich vest should I choose for my body size, comfort and operator type?39

2008Steadi-Newbies forum

18 years old. Gear and prices may have changed since.

The Sony EX3 camera can output both HD-SDI and composite standard definition video from the same connector, with a menu setting to switch between them.
Standard definition analog composite output on the Sony EX3 comes from the monitor connector on the rear of the camera, not the HD-SDI port.
A right-angle BNC connector should be used when connecting the camera to avoid the cable striking the operator's face.
Sony cameras typically use proprietary connectors for composite video rather than standard BNC or RCA connectors, requiring adapter cables.
The sled can be powered directly by the camera when using appropriate cables, providing power to the stabilizer from the camera's battery.

Discussion references specific 2008-era camera models and equipment.
The HD-SDI output method mentioned did not work in at least one user's experience with the EX3.
Advice about weight plates for lighter cameras suggests compatibility may vary based on camera weight.