Choosing a protective case for a 29-inch stabilizer sled

Gear

ZephyrCan I fly my Alexa or RED on a Zephyr?389

Master SeriesIs a used Master Series rig worth buying as a first big rig?191

BFDHow do I power my BFD receiver from my camera or sled?186

VoltCan I retrofit a Volt onto my existing sled or gimbal?168

ArtemisHow do I power my camera and accessories from an Artemis sled?166

MDRWhere can I mount my Preston MDR on my rig?143

ModulusIs there a Modulus option for HD wireless video?141

G-70Will my G-70 fit my vest, gimbal or sled?126

FI+ZCan I control iris and zoom wirelessly, not just focus?60

HU3Where can I get my HU3 repaired, refurbished or repainted?60

CineLiveHow do I pack and case my CineLive rig for transport?54

G-70XHow does the G-70X compare to Pro Titan, Xarm and other arms?46

Trinity 2Is Trinity 2 SUP 3.0 firmware safe to install or buggy?46

Ultra VestWhich vest should I choose for my body size, comfort and operator type?39

2014Cases/Carts/Stands and Transport forum

12 years old. Gear and prices may have changed since.

The Pelican 1690 case with 30.01 inches interior length provides approximately half an inch clearance on each side of a 29-inch sled and offers adequate protection despite the tight fit.
The Pelican 1730 case provides several inches of clearance all around but is significantly larger and bulkier than needed.
Removing the battery hanger before flying reduces the sled footprint and allows use of a soft case for regular transport.
Custom-made foam cases can be tailored to fit specific equipment configurations and may provide better protection than standard hard cases, though at higher cost.
The Pelican 1700 case is mentioned as an alternative that may accommodate a sled of this size without requiring excessive depth.
Hard case manufacturers such as Anvil and Thermodyne offer options that can be configured to fit a 29-inch sled properly.

The discussion does not compare actual protection levels between tight-fitting and loose-fitting hard cases.
No detailed information provided about the Pelican 1700 specifications or suitability for this particular sled.
Custom case effectiveness depends on individual setup and use patterns, not systematically tested.
The original question specifically concerned a Pro 2 sled with Rig Engineering battery hanger, which may not apply to all sled types.