2004Sled forum
Electronics box design and wiring configuration for a modular camera support system
22 years old. Gear and prices may have changed since.
What the thread found
- A three-box electronics arrangement can distribute power and video signals from multiple battery sources to camera and monitor equipment through a hierarchical post-mounted configuration
- Using an adjustable monitor mount to support both the monitor and battery box through the same mounting post creates a balanced, vibration-resistant assembly where both components can move slightly under impact
- A one-piece post compatible with existing quick-disconnect locking systems allows the entire rigged assembly to break down into smaller packages for transportation
- Standard 8-pin Lemo connectors and PRO-compatible wiring allows the system to work with monitors and accessories from different manufacturers without custom cable fabrication
- A multi-battery approach with individual circuit breakers enables selective power distribution, such as powering the camera from one battery while powering the system from another, or combining batteries for higher voltage output
Depends on
- The design assumes specific battery models (Proformer brand mentioned) and may require adjustment for batteries with different center-of-gravity characteristics
- One rear battery box connection uses non-standard wiring incompatible with PRO cables, requiring custom fabrication for that single link
- The configuration appears designed for a specific class of equipment from particular manufacturers and may require adaptation for other monitor or camera systems
- No testing results or performance data under actual operating conditions are provided