Power cable connector specifications for cinema cameras

Gear

ZephyrCan I fly my Alexa or RED on a Zephyr?389

Master SeriesIs a used Master Series rig worth buying as a first big rig?191

BFDHow do I power my BFD receiver from my camera or sled?186

VoltCan I retrofit a Volt onto my existing sled or gimbal?168

ArtemisHow do I power my camera and accessories from an Artemis sled?166

MDRWhere can I mount my Preston MDR on my rig?143

ModulusIs there a Modulus option for HD wireless video?141

G-70Will my G-70 fit my vest, gimbal or sled?126

FI+ZCan I control iris and zoom wirelessly, not just focus?60

HU3Where can I get my HU3 repaired, refurbished or repainted?60

CineLiveHow do I pack and case my CineLive rig for transport?54

G-70XHow does the G-70X compare to Pro Titan, Xarm and other arms?46

Trinity 2Is Trinity 2 SUP 3.0 firmware safe to install or buggy?46

Ultra VestWhich vest should I choose for my body size, comfort and operator type?39

2005Steadi-Newbies forum

21 years old. Gear and prices may have changed since.

Arri 435, 535, and SR3 models use Fischer 2-pin connector type S105Z087 for power input.
Standard 12V camera and video camera power uses 4-pin XLR with pin 1 as minus and pin 4 as plus.
Moviecam power input is a 4-position XLR connector with pin 1 as ground and 24V DC, with pins 2-4 commonly jumpered together.
Panavision cameras use two Lemo connectors for power input: FFA3S303 (larger) and FFA1S302 (smaller), both with pin 1 as positive 24V and pin 2 as ground.
Arri 2-position Fischer connectors are available with a lightweight Teflon case, designated SI405 Z087 C3J2R.

Moviecam pin assignments may vary depending on the rental house or camera source.
The discussion focuses on cinema cameras from the early 2000s era and may not cover all models or manufacturers.
No diagrams or visual schematics are provided, only connector type specifications and pin assignments.