2009Steadi-Newbies forum
Spring arm tension adjustment for Steadicam stabilizers
17 years old. Gear and prices may have changed since.
What the thread found
- A camera mounted on a spring arm will sit lower than desired if the springs are too loose and higher than desired if the springs are too tight.
- An initial setup approach is to adjust the arm knobs so that both arm sections are level with the floor, with further fine-tuning performed after gaining more experience.
- Spring tension that is improperly set can produce visible artifacts in recorded footage that indicate adjustment is needed.
Depends on
- The specific visual indicators of incorrect spring tension in footage are not detailed in this discussion.
- No concrete guidance is provided on how to identify the correct spring tension by viewing the actual recorded video.