What the thread found

• A fore/aft knob on a camera stage can slip due to wear on the dovetail or damage to internal components.
• The aluminum ridge surrounding the stainless steel wedge in the locking mechanism can crack from repeated use and over-tightening, causing the knob to slip.
• Replacement parts for older camera stages may still be available from the manufacturer if you specify the correct model designation when ordering.
• Retightening the knob may provide temporary relief but does not address underlying wear or damage that will recur.

Depends on

• The aluminum ridge crack was found on an older unit with extensive usage history.
• Availability of replacement parts depends on the specific model and may require knowing the correct designation to request from the manufacturer.
• Visual inspection alone may not reveal damage to internal components.

Parts

Top Stage

Same gear or parts

1. 2026Tiffen Steadicam® Elite sled (2026): build quality, power distribution, and load capacity versus Steadicam® Axis.FacebookSteadicam operators group
2. 2026Powering everything from the sled: voltage, current, and why the two get confusedOperator practice
3. 2026Choosing and troubleshooting the monitor on a stabilizer rigDisputedOperator practice
4. 2026Transvideo has ceased trading: what owners of their monitors need to knowOperator practice