What the thread found

• A four-pin Hirose HR10-7R-4S connector is used for combined video output and 12V power delivery on broadcast equipment
• The four pins on this connector are assigned as follows: pin 1 is power ground, pin 2 is video ground, pin 3 carries video signal, and pin 4 supplies 12V battery power

Depends on

• Information sourced from similar equipment model rather than the exact device in question
• Recommendation to verify specifications directly with the manufacturer before relying on this information
• Discussion is from 2009 and may not reflect current specifications

Gear in this thread

Master Seriescatalog

Same gear or parts

1. 2026Proper clamping force on gimbal saddle clamps with heavy cameras: risk of over-tighteningFacebookSteadicam operators group
2. 2026Adjusting play in a Steadicam® Master Series gimbal yoke and balancing it for smooth 180-degree pan without tipping.DisputedFacebookSteadicam operators group
3. 2026Entry-level stabilizer strategy on a 15,000 USD budget: Rever EVO versus used Artemis 2 or M2 plus Volt, in a market with limited secondhand availability.DisputedFacebookThe Steadicam Group
4. 2026Choosing between upgrading an older ProVid-2 kit or investing in a professional rig: workshop-first versus equipment-first approach for beginners.DisputedFacebookSteadicam operators group