2017General Discussion forum
Pre-purchase inspection checklist for a Broadcast Master camera stabilization system
What the thread found
- The stage mechanism should move smoothly across its full range in all directions before and after purchase.
- Operating the gimbal under load allows you to assess whether panning and tilting functions work smoothly.
- Upgrading to higher definition video line capacity should be prioritized if not already completed on the sled.
- All power connections and video signal paths need to be tested and verified as functional.
- The eye bolts used for side-to-side adjustment on the arm socket are prone to wear and should be replaced with new components as preventive maintenance.
- Shoulder webbing and fasteners on the vest can flex excessively, potentially causing misalignment of the main spar, and this flexing should be minimized through stiffening modifications.
- The gimbal assembly can be cleaned without complete disassembly if necessary.
Depends on
- Specific inspection procedures for the arm require detailed documentation beyond the scope of this discussion.
- The sled may benefit from high-definition line upgrades depending on current configuration and intended use.
- The extent of vest modifications needed depends on whether the system uses plastic or leather panels.