What the thread found

• The Decimator MD-HX received a firmware upgrade that added image flip and flop functions, enabling use for low-angle camera work.
• The MD-HX performs SDI to HDMI cross-conversion in either direction and can function as a 1x4 distribution amplifier.
• The MD-HX can convert 23.98psf frame rates to other HD formats.
• All MD-HX functions can be controlled through a front panel screen interface or via downloadable UCP software for Mac and PC, without requiring dip switches or rotary knobs.
• The MD-HX can downconvert to SD format but outputs only as SD-SDI, not analog composite video.
• When powering an MD-HX from a PRO-1 rig top stage via a 1S.303 plug, the positive voltage runs approximately 16.4V on the top pin and ground on the bottom right pin.
• When adapting power cables for the MD-HX, soldering the DC barrel cable directly into the Lemo connector produces a cleaner result than splicing two cables together.

Depends on

• The MD-HX downconversion capability is limited to SD-SDI output format.
• Power voltage specifications are based on a single multimeter reading from one specific rig configuration.
• The power cable soldering recommendation assumes availability of heat shrink tubing and assumes the cable clamp can accommodate the barrel connector diameter.

Parts

Top Stage

Same gear or parts

1. 2026Choosing between upgrading an older ProVid-2 kit or investing in a professional rig: workshop-first versus equipment-first approach for beginners.DisputedFacebookSteadicam operators group
2. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
3. 2026Tiffen Steadicam® Elite sled (2026): build quality, power distribution, and load capacity versus Steadicam® Axis.FacebookSteadicam operators group
4. 2026Swapping the camera between tripod and rig: the cheapest upgrade most operators never makeOperator practice