What the thread found

• A top stage that moves slightly forward or backward on the post is typically caused by loose allen bolts that secure a metal wedge beneath the stage
• The wedge should be tightened so it clamps firmly against the underside of the top stage, creating a secure metal-to-metal connection
• When tightening the allen bolts, the top stage must be aligned carefully to avoid restricting the side-to-side adjustment mechanism
• A temporary paper shim can be used as a spacer to help position the wedge correctly during initial tightening, but must be removed before final tightening to ensure proper metal contact
• The adjustment can require multiple attempts to achieve correct alignment and smooth operation of the side adjustment knob

Depends on

• Applies specifically to second generation Flyer models and similar designs with this wedge mechanism
• The procedure requires careful alignment to avoid misalignment of the side-to-side adjustment system

Parts

Top Stage

Same gear or parts

1. 2026Tiffen Steadicam® Elite sled (2026): build quality, power distribution, and load capacity versus Steadicam® Axis.FacebookSteadicam operators group
2. 2026Betz Tools has changed hands to 2eyetec, and what that means for parts and serviceOperator practice
3. 2026Recommended upgrade priorities for a GPI Pro steadicam rigSteadi-Newbies
4. 2026Choosing between upgrading an older ProVid-2 kit or investing in a professional rig: workshop-first versus equipment-first approach for beginners.DisputedFacebookSteadicam operators group