2004Steadi-Newbies forum
Arm pin diameter specification for gimbal handle attachment
22 years old. Gear and prices may have changed since.
What the thread found
- The arm pin diameter that the gimbal handle sits on measures approximately 15.8mm or 0.622 inches
- This pin size works with both standard and PRO bracket posts
- The pin diameter is compatible with different gimbal models including XCS and 3A models
- A gimbal hole can be drilled to 16mm with a locking screw to accommodate pins up to that diameter
Depends on
- The measurement was verified on specific arm models from 2004 and may not apply to all current designs
- The solution of using a 16mm hole with a locking screw was proposed but not confirmed as tested