2010Sled forum
Archer 1 sled structural issues and modifications
16 years old. Gear and prices may have changed since.
What the thread found
- The sled base monitor holder is secured by only four screws plus an internal hinged metal joint and a locking collar that screws down to secure the post to the lower sled section, and if these internal components are missing the sled is incomplete.
- The sled base can gradually loosen over time with use and may require periodic re-tightening of the securing screws.
- The gimbal holder on the G-50 arm is attached with a small detachable screw.
- A front weight battery plate can be added to improve the balance characteristics of the sled.
- An Archer 1 sled can be modified using a Genesis sled base combined with selected parts from the original base, with cable connectors relocated to create an improved configuration that balances more easily while maintaining the folded profile.
Depends on
- The structural failure described occurred during live recording, making the severity unclear from the account alone.
- The balance improvements mentioned are subjective impressions rather than measured data.
- The modification technique requires specific technical skills and access to replacement components.
- Only one example of a detailed modification approach is provided in the thread.