2014Monitors forum
Upgrading a Steadicam Flyer LE sled with HD monitor rewiring and connector modifications
12 years old. Gear and prices may have changed since.
What the thread found
- Rewiring a Steadicam sled to accommodate HD monitors typically increases the rig's value rather than diminishing it, as modern monitors are significantly more capable and command higher prices than original equipment.
- The proprietary 9-pin connector on Steadicam sleds can be adapted to work with newer monitors by having a custom Y-cable fabricated that converts the new monitor connectors (such as 4-pin XLR and BNC) to the existing 9-pin specification.
- It is possible to maintain compatibility with the original monitor after rewiring by requesting an adapter Y-cable during the upgrade process, allowing the original monitor to serve as a backup.
- Custom rewiring work should be performed by someone experienced with the connectors and soldering requirements rather than attempted without proper skills, as mistakes can render the sled inoperable.
- Modern HD monitors for upgraded sleds use power sources like 4-pin XLR connectors or require P-tap adapters, which differ from the power specifications of original monitors.
Depends on
- The rewiring process requires soldering expertise and should be handled by experienced technicians.
- This discussion centers on a specific model with particular connector specifications that may not apply to all Steadicam configurations.
- No specific technical details were provided about which HD monitor models are compatible or optimal for this sled.