SteadiHub
2013Sled forum

PRO Live sled connector specifications and modular compatibility

13 years old. Gear and prices may have changed since.

What the thread found

  • The PRO Live sled features dual HD plus analog capability with multiple connector types including two Lemo 2B.303, four Lemo 0B.303, four Hirose connectors, and one Lemo 1B.308 connector.
  • The sled is compatible with Gen 2 and later modular components and uses the current HD 18 pin cable for centerpost connections.
  • The Gen IV Live battery rack provides three battery positions with the top rear and bottom front positions wired in parallel, while the bottom rear position can function as auxiliary or camera/monitor output via jumper block configuration.
  • The sled supports both 12vdc and 24vdc power systems.
  • An adjustable and detachable leveler attachment is available for single or dual battery configurations on the rear, allowing three-battery flight when removed.
  • The modular design enables users to configure systems ranging from lightweight single-camera setups with base gimbal and Dbox2 to heavier configurations using Dbox3 and different arm options while maintaining component compatibility.

Depends on

  • The thread does not provide technical specifications or performance data.
  • Compatibility claims are stated but not technically documented.
  • Pricing information is approximate and excludes monitor and batteries.
Read the original threadAsk about this threadThe answer cites the archive