2008Sled forum
Weight considerations for mounting HVX200 camera with Movietube adapter on a Steadicam Flyer sled
18 years old. Gear and prices may have changed since.
What the thread found
- The Movietube adapter weighs approximately 3kg due to its cast aluminum case and solid glass prism, plus an additional 1.5kg for the lens, totaling around 4.5kg
- An HVX200 camera weighs approximately 2kg
- Mounting an HVX200 with Movietube, remote focus, and video transmitter on a Flyer sled approaches or exceeds the weight capacity, leaving minimal margin for accessories
- The angled camera orientation used by the Movietube affects the sled's balance characteristics and requires experimental adjustment
- A Movietube setup has been successfully demonstrated on a Steadicam Flyer at a broadcast event, with the gimbal showing adequate clearance despite the additional weight
Depends on
- Weight figures for the Movietube are estimates rather than official specifications
- The exact weight capacity of the Flyer sled and behavior under maximum load is not detailed in the discussion
- Success depends on specific lens choice and total accessory weight
- Balance adjustment requirements are noted but not fully explained