2013General Discussion forum
Waterproofing coating product performance and application potential
13 years old. Gear and prices may have changed since.
What the thread found
- A two-part spray coating system using hydrophobic adhesive technology can provide water repellency on various surfaces with coverage of approximately 10-15 square feet per kit.
- Testing showed minimal corrosion on steel samples treated with this coating after 1,000 hours of salt fog exposure compared to polyurethane-coated samples.
- The coating leaves a visible foggy layer after application, making it unsuitable for surfaces where clarity is required.
- Application to textiles such as fabric and cloth items is uncertain and would require testing to determine effectiveness.
- The coating may degrade with casual contact and friction, with unclear durability timelines for when reapplication becomes necessary.
- Integration with regular cleaning cycles by reapplying the coating during maintenance could potentially extend its protective lifespan.
Depends on
- The long-term durability and wear resistance characteristics were not definitively established in the discussion.
- No conclusive information was provided about when the coating needs reapplication or its expected lifespan.
- The user experience testing mentioned was planned but results were not reported in the thread.
- Effectiveness on flexible surfaces like fabric remained untested during the discussion.
- Coverage rates assume standard application conditions which may vary with different surface types and textures.