What the thread found

• Before working with XTune, set it to minimum and first select the correct spring combination for the load—use as few springs as possible, but compressed strongly.
• XTune is not a 'ride' control function like those found on Tiffen arms.
• Registering the arm in the manufacturer's care portal provides tuning tips and firmware updates; one operator's tutorial video on spring selection is recommended as a reference.
• One operator fabricated a custom screw to fix the post inside the arm and added a hanging hole for transport convenience.

Depends on

• Correct spring selection depends on the specific camera and payload weight.

Gear in this thread

ArmX1catalog

Same gear or parts

1. 2026Comparison of Pro Titan arm versus Smart System X1 arm performance and tuningGeneral Discussion
2. 2025Steadicam® Axis Action Kit for small productions: payload limits, sled performance, and typical upgrade path for returning operators.FacebookSteadicam operators group
3. 2025Spring combinations in ArmX1 canisters for optimal arm response and feel.FacebookSteadicam operators group
4. 2025Load capacity limits on the Steadicam® Axis: arm choice, bottlenecks, and compatible upgrades.FacebookSteadicam operators group