2013Steadi-Newbies forum
Balancing a heavy camera on a stabilizer rig with offset mounting points
13 years old. Gear and prices may have changed since.
What the thread found
- When a camera is heavier on one side due to lens or design, adjusting the mounting plate to the opposite end may not fully resolve the imbalance.
- Drilling additional mounting holes off-center in the camera plate allows repositioning the camera to center its weight over the stabilizer mounting point.
- An intermediate offset adapter plate bolted between the camera and the stabilizer plate can shift the camera's center of gravity into alignment.
- Adding counterweight accessories such as a cage, external recorder, monitor, or battery pack to the lighter side can help balance the rig.
- Some stabilizer models feature cheese-plate style mounting with screw holes on multiple locations rather than only the center, allowing easier weight balancing.
Depends on
- The stabilizer rig in question (Flycam C7) has limited space, which may restrict drilling or adding offset adapters.
- Success of counterweight solutions depends on available space and accessory compatibility with the specific stabilizer model.
- The adequacy of these solutions varies based on the degree of weight imbalance and the stabilizer's weight capacity.