What the thread found

• An arm pin offset bracket (also called a versatility bracket or spacer) is used to carry the rig inverted or offset, for example in low mode or to position the volt and yoke grip at a more ergonomic height.
• Some stabilizer arms have an offset bracket permanently mounted as part of their design.
• Small aftermarket manufacturers produce offset brackets compatible with various rigs, including options for the Steadicam® Pro Arm.
• A European small manufacturer offers V-brackets and arm posts (3 and 9 inch lengths) with international 5/8-inch pins, worldwide shipping, and lifetime warranty.
• The 5/8-inch pin diameter is the international standard for stabilizer arm connections.
• One operator noted that plastic screws on certain offset models can be replaced with metal fasteners for improved durability.

Depends on

• Pin diameter must match the rig: 1/2-inch and 5/8-inch sizes are in use, with 5/8-inch being the industry standard.

Gear in this thread

Voltcatalog

Parts

Low Mode, Arm Post

Same gear or parts

1. 2026Volt generations, and whether the system is necessary at allDisputedOperator practice
2. 2026EFP gimbal grip binding on the center rod: causes, cleaning, and repair versus replacement options.DisputedFacebookSteadicam operators group
3. 2026Rig setup for 180-degree immersive camera operation with Blackmagic URSA Cine Immersive: minimizing rig and monitor visibility in ultra-wide field of view.FacebookThe Steadicam Group
4. 2026Pan-bearing friction and image oscillation in Tiffen gimbals with Volt power cable: root cause and acceptance criteria.DisputedFacebookThe Steadicam Group