2013Brackets/Widgets forum
DIY folding wind blocking panels for camera stabilization work
13 years old. Gear and prices may have changed since.
What the thread found
- A folding wind deflector can be constructed from aluminum extrusion, fiberglass window screening, bolts, and nylon washers for under 100 dollars in materials.
- The design consists of six pieces of 1/8" by 1" aluminum extrusion with two pieces offset to hold window screening, creating a 48" by 36" blocking surface when fully opened.
- The frame folds compactly enough to fit inside a camera stand bag and is light enough for a production assistant to handle with minimal instruction.
- Fiberglass window screening effectively reduces wind interference with camera equipment when mounted on an aluminum frame.
- Multiple deflectors can be deployed simultaneously for more comprehensive wind blocking coverage during filming.
- Similar designs using aluminum tubing construction have been proven effective on professional film productions.
Depends on
- Window screening material limits maximum panel width to 36 inches as purchased from standard retail sources.
- The design was tested on a student film production with limited crew resources, not necessarily representative of all shooting conditions.
- Costs and availability of materials may vary by location and supplier.
- Long-term durability data is limited to the original builder's experience.