2010Cameras (Film/Video/HD) forum
Operating an Arri SR2 film camera on steadicam
16 years old. Gear and prices may have changed since.
What the thread found
- The SR2 uses a 4-pin XLR connector for power.
- The eyepiece should be closed or taped shut during flight to prevent light leaks.
- The camera flies better when using onboard batteries and a larger matte box rather than external power cables.
- Film travel from left reel to right reel causes a measurable weight shift over successive takes, requiring side-to-side balance checks after every few shots.
- The SR2 is notably lightweight and benefits from additional accessories to reach operational balance weight around 25 pounds.
Depends on
- One participant mentioned confusion about SR2 vs SR3 models and their different voltage requirements, suggesting model-specific setup details may vary.
- The discussion mentions a video tap configuration that failed during use, indicating that particular rigging approach may have reliability issues.
- Balance recommendations are based on practical experience but not systematically tested across all shooting conditions.
- Power supply voltage and connector specifications were stated as 12v but not exhaustively verified for all unit variations.