2013Video Assist and Video Accessories forum
Wireless HD video transmission system performance and features for camera monitoring
13 years old. Gear and prices may have changed since.
What the thread found
- The system uses dynamic frequency selection to automatically tune and maintain connection without manual adjustment
- Latency is less than 1 millisecond, making real-time monitoring practical
- Operating range reaches 20-40 meters with movement and up to 70 meters when transmitter and receiver are stationary
- The signal reconnects quickly when temporarily blocked or out of range, typically within 10 seconds
- The integrated LCD receiver screen provides a convenient portable monitoring solution and eliminates the need for a separate external display
- Link stability is maintained even when line of sight is partially obstructed, though the manufacturer recommends maintaining line of sight
- The system performs effectively in RF-dense environments such as office buildings with multiple wireless networks
- The integrated receiver screen generates no fan noise and does not produce significant heat during extended use
- The system initially supported only 25fps and multiples thereof, with 24p and 24fps support planned for later release
- The system uses unicast transmission rather than multicast, limiting simultaneous reception to one receiver unit per transmitter
- The receiver lacks HD-SDI video loop-through on some models, though this feature is available on other variants
- Signal performance was comparable to or better than competing systems like Teradek Bolt and Paralinx Arrow in field testing
Depends on
- The tested model lacked HD-SDI loop-through capability, though this was available on alternative configurations
- Multicast support was not available at the time of testing
- 24p and 24fps support was not available during the testing period described
- Performance comparisons are based on limited field testing by two users on specific productions
- No independent performance testing was conducted; assessments were based on user experience versus competitor equipment