2014Operating forum
Operating a camera rig through extremely tight spaces
12 years old. Gear and prices may have changed since.
What the thread found
- An 18-inch-wide metal gate between buildings and a 22-inch-wide hallway can be negotiated with a camera rig by operating at difficult body angles and pushing the sled ahead while moving sideways through the opening.
- The folded-back position with the arm, where the two sections are stacked to minimize the rig's width, can help reduce the footprint needed for tight passages.
- The folded-back arm position becomes impractical when the operator needs to push the sled through a narrow doorway sideways, as the arm cannot properly collapse during the transition.
- Leading shots taken over shorter distances may work better than attempting the folded configuration through the tightest points of the passage.
Depends on
- The account describes one specific real-world situation from 2014 and may not represent typical tight-space operating challenges.
- The folded-back technique was attempted but not successfully completed through the actual narrow doorway, limiting confirmation of its effectiveness in this scenario.
- No technical specifications provided regarding the camera rig model, arm type, or exact configuration used.