2017Steadi-Newbies forum
Unwanted side-to-side panning motion when walking with a Steadicam Solo
What the thread found
- A tight grip on the operating hand can introduce unintended panning motions into the shot, which can be tested by temporarily releasing the hand to see if the motion stops
- Loosening the grip intensity while operating may reduce or eliminate subtle panning artifacts during walking
- If panning persists after relaxing the grip, the gimbal mechanism itself may have friction or mechanical issues requiring professional service
- Excessive tension in the operating hand during Steadicam work should be minimized to maintain smooth, stable footage
Depends on
- The solution was not definitively confirmed in this thread—the original poster indicated they would test it and report back but no follow-up result was provided
- Physical gait issues like a slight limp may contribute to the problem but were not explored further
- The advice applies to the Steadicam Solo model specifically