What the thread found

• A Hirose 4-pin connector carries both power and video signals, with pin 1 being power ground, pin 2 being video ground, pin 3 being video output, and pin 4 being positive 12V DC regulated at 1 ampere maximum.

Depends on

• The pinout was provided from a manual for a master series monitor and may not be confirmed as identical for the Provid model.
• The thread does not specify the exact Provid monitor model or provide confirmation that the pinout matches the actual Provid documentation.

Gear in this thread

Master Seriescatalog

Same gear or parts

1. 2026Choosing between upgrading an older ProVid-2 kit or investing in a professional rig: workshop-first versus equipment-first approach for beginners.DisputedFacebookSteadicam operators group
2. 2026Adjusting play in a Steadicam® Master Series gimbal yoke and balancing it for smooth 180-degree pan without tipping.DisputedFacebookSteadicam operators group
3. 2026Entry-level stabilizer strategy on a 15,000 USD budget: Rever EVO versus used Artemis 2 or M2 plus Volt, in a market with limited secondhand availability.DisputedFacebookThe Steadicam Group
4. 2026Proper clamping force on gimbal saddle clamps with heavy cameras: risk of over-tighteningFacebookSteadicam operators group