What the thread found

• A modification can integrate multiple camera power outputs directly into a gimbal top stage, eliminating the need for a separate junction box
• This integration reduces the vertical distance between the camera and gimbal by approximately one inch
• The modification uses a PRO locking collar adapted to work with a Betz top stage
• Two camera power outputs can be accommodated with this approach
• The complete modification costs approximately one thousand dollars, with connector options potentially increasing the price

Depends on

• Only suitable when two camera power outputs are sufficient
• Requires a PRO bayonet mount, which manufacturers do not sell separately and must be sourced through third-party suppliers
• The modification was initially applied to Betz equipment with possible future adaptation to Wave equipment mentioned but status unclear
• Specific dimensions and detailed attachment methods are not fully documented in the discussion

Parts

Top Stage

Same gear or parts

1. 2026Choosing between upgrading an older ProVid-2 kit or investing in a professional rig: workshop-first versus equipment-first approach for beginners.DisputedFacebookSteadicam operators group
2. 2026Reducing voltage drop in standard Steadicam® Zephyr cabling for high-power broadcast cameras.DisputedFacebookSteadicam operators group
3. 2026Tiffen Steadicam® Elite sled (2026): build quality, power distribution, and load capacity versus Steadicam® Axis.FacebookSteadicam operators group
4. 2026Swapping the camera between tripod and rig: the cheapest upgrade most operators never makeOperator practice