What the thread found

• The Transvideo Evolution 8-inch monitor is wider than older 7-inch monitors and may not fit into existing U-shaped monitor brackets without proper adaptation
• The correct mounting solution requires knowing the distance between the rods and their diameter to select an appropriate yoke bracket adaptor
• Transvideo manufactures yoke bracket adaptors specified by rod spacing and diameter measurements, such as a 89/16 model indicating 89mm spacing and 16mm rod diameter
• Specialist suppliers like Tiffene offer pre-assembled bracket solutions with proper spacers configured for specific monitor models and rig setups
• The Quattro Monitor Arm from cam-jam.de is an alternative mounting solution compatible with the Transvideo Evolution monitor on various rigs

Depends on

• The thread does not provide measurements or confirmation of rod specifications for the specific rig in question
• No detailed information is given about whether the suggested solutions were ultimately successful or how well they performed
• The recommendations come from forum members rather than official documentation

Parts

Monitor Bracket

Same gear or parts

1. 2026Modernizing Steadicam® PRO sled: Gen-2 battery holder retrofit and universal monitor bracket on the tube collar.FacebookSteadicam operators group
2. 2026Low mode and flipping the image: what to check on the camera before the dayOperator practice
3. 2026Powering everything from the sled: voltage, current, and why the two get confusedOperator practice
4. 2026Choosing and troubleshooting the monitor on a stabilizer rigDisputedOperator practice