2011Sled forum
Camera rig becoming unstable when rotated 180 degrees during operation
15 years old. Gear and prices may have changed since.
What the thread found
- A rig that appears statically balanced and hangs level can develop significant instability when rotated to 180 degrees, indicating poor dynamic balance rather than static balance issues.
- If a rig goes out of level when rotated 180 degrees and held in that position, the gimbal centering needs adjustment rather than the overall rig balance.
- Dynamic balance problems typically manifest during pan movements or steady rotations, whereas static balance issues would be apparent when the rig is stationary.
Depends on
- The specific rig model was not identified in the discussion, so solutions may vary depending on equipment.
- No specific adjustment procedures or diagnostic methods were detailed beyond identifying that gimbal centering may need work.
- The exact nature of the instability was not fully clarified—whether it occurs during active panning or only when held at 180 degrees.