2026Sled forum
Seized side-to-side adjustment mechanism on Tiffen Flyer G1 sled after impact damage
What the thread found
- Impact from a fall can create play in the sled stage that causes clunking
- Attempting to temporarily stabilize a damaged sled by wedging objects between components can cause excessive tension that seizes adjustment mechanisms
- A seized side-to-side adjustment screw may result from forced tension applied during troubleshooting attempts
Depends on
- The specific damage mechanism described involved a temporary wedge that was then sheared off, which may not apply to other seizure scenarios
- No solution or resolution is documented in the thread
- The discussion does not explain the internal construction or fastener details of the adjustment mechanism