What the thread found

• Mounting a Marshall Monitor to an Ultimate 2 rig with a monitor support arm and spud can be accomplished using a 1/4x20 Kip handle screw and a monitor mounting plate.
• A custom spud can be machined to fit into a monitor bracket while using the existing Marshall mount.
• A Transvideo bubble level mount may present leveling difficulties when integrated with certain mounting setups.

Depends on

• The advice is based on specific configurations that may not apply universally to all similar equipment combinations.
• Custom machining may be required depending on the exact equipment being used.
• The discussion does not provide complete step-by-step instructions for the mounting process.

Parts

Monitor Bracket

Same gear or parts

1. 2026Modernizing Steadicam® PRO sled: Gen-2 battery holder retrofit and universal monitor bracket on the tube collar.FacebookSteadicam operators group
2. 2026Low mode and flipping the image: what to check on the camera before the dayOperator practice
3. 2026Powering everything from the sled: voltage, current, and why the two get confusedOperator practice
4. 2026Choosing and troubleshooting the monitor on a stabilizer rigDisputedOperator practice