What the thread found

• Antlers are compatible with XCS dovetail plates because the XCS plates have the same width and locking angle as standard camera plates.
• For low mode mounting on an Anton Bauer battery mount, custom adapters can be created using a camera plate with gold pins drilled at specific positions.
• A quick mounting solution involves drilling three holes at the correct position on a camera plate and adding three gold pins to create a functional adapter.
• Some users have successfully used Antlers as an alternative to gyroscopes when sound considerations make gyros impractical.

Depends on

• The thread discusses solutions from 2007 and relies on custom fabrication or modifications.
• Availability of ready-made adapters depends on the fabricator's schedule and current inventory.
• The specific drilling positions and technical specifications for the gold pin adapter are referenced but not detailed in the discussion.

Parts

Low Mode

Same gear or parts

1. 2026Choosing between Wave, Volt 2, and MK-V Level gimbals: performance in wind, rig weight, maintenance, and mode switching.DisputedFacebookSteadicam operators group
2. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rod mounts and CamJam mounts to minimize vibrationsDisputedSteadiHub
3. 2026Low mode and flipping the image: what to check on the camera before the dayOperator practice
4. 2026Low-mode monitor selection for Volt Brain rig: latency performance of Transvideo Starlite versus current alternatives.DisputedFacebookThe Steadicam Group