2023Gimbal forum
Disassembly and cleaning procedure for Pilot/Flyer gimbal bearings
What the thread found
- The gimbal contains two pressure rings that hold components in place: an outer ring and an inner ring.
- A precision flathead screwdriver can be inserted under the lip of the exposed end to pry off the pressure rings by gently sliding the tool around the circumference.
- After removing the outer pressure ring, the sleeve can be withdrawn by hand using gentle rocking motions back and forth.
- The bearing itself is secured in the same manner as the sleeve and can be extracted using the same technique.
- Reassembly involves pressing the ring back into position, starting with the squared end inserted into its channel.
- Repeated disassembly and reassembly cycles will gradually reduce the tension of the pressure rings over time.
- Replacement bearings are available for purchase online as standard components.
Depends on
- This procedure involves disassembly that is not recommended for frequent repetition due to wear on the pressure rings.
- The thread does not provide specific model numbers or compatibility information beyond the Pilot/Flyer designation.