What the thread found

• A clamp with V-mount clip attached to a V-clip screwed into the camera body allows centered mounting and rotation around the rod with minimal protrusion beyond the lens.
• XCS makes a bracket specifically for MDR3 that attaches to 15mm rods.
• A dovetail mount designed for MDR systems can be obtained as an accessory.
• A cheeseplate-style mount for MDR3 exists that can be modified with an additional rod mount bracket.

Depends on

• The thread discusses multiple solutions without comparing their relative merits or practical differences.
• Personal preferences for mounting methods vary and may depend on specific camera sled models.
• No detailed specifications or measurements provided for the various bracket options.

Gear in this thread

MDR

Same gear or parts

1. 2026Power loss on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.DisputedFacebookArri Artemis Trinity
2. 2025Custom servo zoom controller for Tilta Nucleus system using Bebob Zoe housing and 7-pin LEMO connectorFacebookSteadicam operators group
3. 2024Mounting Sony Venice 2 on ARRI Trinity with SAM-0 plate: build configuration and balancing strategies.FacebookArri Artemis Trinity
4. 2023Mounting Preston MDR4 focus motor and Light Ranger iris control on an ALEXA 35 on the ARRI TrinityFacebookArri Artemis Trinity