SteadiHub
2011Vehicles and Mounts forum

Modifying Segway X2 for quick wheel changes to adjust width for different filming locations

15 years old. Gear and prices may have changed since.

What the thread found

  • The X2 footprint can be reduced by approximately 25 centimeters when switching from wide golf-style wheels to narrower I2-type wheels.
  • Wheel swaps between thick and thin profiles can be accomplished in 4 minutes when using a modified quick-change mounting system, compared to the standard longer procedure.
  • Narrower wheels on an X2 with modified hardmount fenders result in a width only 4 centimeters wider than an I2 vehicle.
  • Switching to narrower wheels on an X2 improves turning response and agility while maintaining acceptable performance on flat indoor surfaces.
  • Standard Turf wheels can be dismantled and reversed by removing four large Allen bolts, though this provides minimal width reduction when fenders remain in place.
  • Reversing Turf wheels offers limited practical benefit because the fenders still extend beyond the wheel profile.
  • Modified hardmount fenders prevent the use of spacers that would normally be required when fitting I2 wheels to an X2 with standard fenders.

Depends on

  • The quick-change wheel system described requires custom modifications not detailed in the discussion.
  • Reversed wheels provide negligible space savings.
  • Narrower wheels are not suitable for off-road use.
  • Some responses were incomplete or promised follow-up information never shown.
  • The exact specifications of the fender modifications were not fully explained.

Parts

Hard Mount

Same gear or parts

  1. 2026Hard-mounting the rig to a vehicle: the two riggings, the honest speeds, and when not to do it at allOperator practice
  2. 2026Rigging a Steadicam® Zephyr with Sony FX6 to an off-road vehicle (UTV) for live transmission: Hard Mount preparation and alternativesFacebookSteadicam operators group
  3. 2026Preventing socket block fracture on GPI-PRO arms during hardmount on rough terrain: rod end durability and assembly technique.DisputedFacebookThe Steadicam Group
  4. 2025Power supply for Steadicam® Axis on hard mount: cable routing and battery options for extended interview operation without camera batteryDisputedFacebookSteadicam operators group
Read the original threadAsk about this threadThe answer cites the archive