SteadiHub
2007Cameras (Film/Video/HD) forum

Panavision SSR-1 solid state recorder performance and specifications on Genesis camera

19 years old. Gear and prices may have changed since.

What the thread found

  • The SSR-1 solid state recorder weighs 6 pounds and includes a built-in down-converter for NTSC or PAL output, eliminating the need for a separate down-converter unit.
  • When mounted on a Genesis camera body with standard accessories, the SSR-1 configuration achieves approximately 33 pounds total weight, matching the weight of a Panavision XL camera despite the Genesis body being heavier.
  • The SSR-1 uses approximately half the power consumption and is nearly half the size compared to a traditional separate tape deck and down-converter combination.
  • The SSR-1 enables single-cable operation to village compared to multi-cable setups required with traditional deck configurations, simplifying rigging for handheld work.
  • The SSR-1 records instantly and provides instant replay capability during testing.
  • Power distribution uses both camera and auxiliary lemo connectors on the top stage to split amperage draw across 4 wires due to connector current ratings.

Depends on

  • Early production limited availability; only one working unit existed at time of report with 20 more units being assembled and expected in late February or early March.
  • User experience limited to one test shoot with particular battery configuration and accessories.
  • Comparison involved specific setup with older battery system and Hytron 140 auxiliary battery rather than standard newer systems.
  • Manufacturing problems were reported as occurring approximately two months before the test.

Parts

Top Stage, Low Mode

Same gear or parts

  1. 2026Low-mode monitor selection for Volt Brain rig: latency performance of Transvideo Starlite versus current alternatives.DisputedFacebookThe Steadicam Group
  2. 2026Tightening a loose quick-release lever on the Top Stage dovetail plate, and preventing camera slip during shoulder operation.DisputedFacebookThe Steadicam Group
  3. 2026Powering everything from the sled: voltage, current, and why the two get confusedOperator practice
  4. 2026Choosing and troubleshooting the monitor on a stabilizer rigDisputedOperator practice
Read the original threadAsk about this threadThe answer cites the archive