SteadiHub
2008Cameras (Film/Video/HD) forum

Using ARRIFLEX 35-III camera on Steadicam EFP rig with power and mounting considerations

18 years old. Gear and prices may have changed since.

What the thread found

  • Steadicam magazine weights are essential for balanced operation on a Steadicam rig, especially for low mode work, and without them the camera becomes difficult to operate due to weight shifting.
  • The viewfinder assembly on this camera model protrudes further from the camera door than typical, requiring additional clearance consideration during rig planning.
  • Maximum power voltage for this camera must not exceed 14.0 volts.
  • A fixed viewfinder option is available from rental houses and is smaller and lighter than the handheld viewfinder, reducing total rig weight.
  • A dedicated 12 volt power feed should be provided to a high speed base unit rather than using a Y cable configuration, with separate power supplies to both the camera and base unit.
  • A precision camera video relay lens can attach to the viewfinder for video split purposes while reducing overall weight compared to other video monitoring options.
  • Walking shots on a stage without low mode operation is feasible without steadicam magazine weights, though weight management becomes more critical with power-limited battery setups.

Depends on

  • Steadicam magazine weights may not be available from all rental houses.
  • The specific power requirements depend on whether high speed shooting and video split equipment are included in the configuration.
  • Operation with single battery power sources requires testing to ensure adequate amperage for all attached devices.
  • This camera model is older and information availability is limited.

Parts

Low Mode

Same gear or parts

  1. 2026Vest drops: what lowering the arm socket actually buys, and what it costs at the topOperator practice
  2. 2026Lemo connectors on the ARRI Artemis sled: pinout, polarity verification, and powering low-mode monitors and Volt battery.FacebookSteadicam operators group
  3. 2026Mounting the TIFFEN Volt brain: rigidity comparison between ARRI rod mounts and CamJam mounts to minimize vibrationsDisputedSteadiHub
  4. 2026Low mode and flipping the image: what to check on the camera before the dayOperator practice
Read the original threadAsk about this threadThe answer cites the archive