What the thread found

• The Alexa 65 requires 24V power supply, with a safe operating range of 22V to 35V and draws approximately 200W continuous
• The Alexa 65 cannot be powered by 12V like other Alexa models
• An onboard Anton Bauer battery plate with built-in converter can supply the required 24V from a 12V battery
• External power through a rig must support 24V at up to 10 Amps
• The Alexa 65 has a different bottom plate configuration than standard Alexa models and is incompatible with standard Alexa Steadicam mounting plates
• A custom intermediate plate may be needed to adapt standard Steadicam plates to the Alexa 65 bottom configuration
• The Alexa 65 with typical cinema setup including batteries, monitor, motors, and accessories weighs approximately 56 pounds

Depends on

• Mounting plate compatibility issues were reported but solutions differed depending on specific plate manufacturers and spacer block availability
• One user mentioned their package included a dedicated Steadicam plate, suggesting solutions may vary by equipment configuration
• The weight specification is from a single production setup and may vary based on specific lens, accessories, and configuration choices

Gear in this thread

MDR

Same gear or parts

1. 2026Power loss on Trinity 2 / Artemis 2 with large cameras (A35, Venice): causes and battery solutions.DisputedFacebookArri Artemis Trinity
2. 2025Custom servo zoom controller for Tilta Nucleus system using Bebob Zoe housing and 7-pin LEMO connectorFacebookSteadicam operators group
3. 2024Mounting Sony Venice 2 on ARRI Trinity with SAM-0 plate: build configuration and balancing strategies.FacebookArri Artemis Trinity
4. 2023Mounting Preston MDR4 focus motor and Light Ranger iris control on an ALEXA 35 on the ARRI TrinityFacebookArri Artemis Trinity